There are four basic aspects must be considered when manufactures decide the overall construction of die casting machine.
1, The installed floor space should be smaller as soon as possible. And it is impossible to use the standard parts.
2, The mechanical and automatic parts will be used during the main production steps and assistant steps.
3, All parts distribution of the die casting machine must be convinent to maintain and clean.
4, To ensure productin saftey, the construction of the die casting machine should accord with artistic standards.

The overall constructions are decided by the form of the machine chamber locations and hydraulic driving way. There are two kinds of the machine chamber locations
including horizontal chamber and vertical chamber.

The basic forms of the overall construction includes die locking construction, injection construction, hydraulic driving componenets, and electronic control system.
These four parts are installed on the horizontal machine body.

Nowadays, manufactures are perfer welding machine body. The body steel must be good quality because it will influence the die locking construction and injection function.
If the steel is not good, there are many troubles for the goods die casting.
1. If the direct parts of the body lose precision because of the bad steel quality, the decompressing parts of the die locking parts won’t working so as to wear down the sleeve and guide bar.
2. And then the die casting machine cannot keep precision to result in bad mould condition.
3. At last, the concentricity will be destroyed.

Die locking parts and injection parts are commonly installed on the same body. It is simple for users to install the machine and keep concentricity between injection parts and chamber.
But the die locking parts and injection parts are separated on the differnet bodies on the huge die casting machine. It because manufactures consider the machine body production technique.

Why we choose separated body sometimes? It becasue we can change horizontal cold chamber die casting machine to hot chamber die casting machine and change vertical cold chamber die casting machine to plastic injection&moulding machine.