J214 TYPE 500KN HOT CHAMBER DIE CASTING MACHINE

The machine is applicable to die casting of non-ferrous metals with low melting point such as Zn (Zinc) and Pb (Plumbum). It is widely used in various industries including automobile and motorcycle parts, meters and instruments, daily-use hardware, and household appliances.

The machine is controlled by industrial level microcomputer. The die casting process parameters can be set up through the person-machine interface and import proportional oveflow valve ensure easy operation of parameter and program setup.The injection system uses large-caliber logic, ensuring die-casting parts have high quality. The machine has remote machine control and trouble locating functions.

The machine is equipped with impored electronic and hydraulic parts, ensuring a reliable and safe whole-machine performance, it is anadvanced type of die casting machine within our country at present.

The project	The unit	J214
Die locking force	kN	500
Stroke of moving platen	mm	210
Inner space between the bars (H x V)	mm	290x290
Thickness of die block (Min./Max)	mm	120/320
Injection force	kN	50
Injection stroke	mm	110
Injection position	mm	0, -40
Ejection force	kN	50
Ejection stroke	mm	50
Diameter of shot sleeve	mm	45
Max. Projecting area of casting	cm2	159
Working pressure of vane pump	MPa	10.5
Motor power	kW	9.5
Dosage of fluid metalPershot(Zinc)	kg	1.1
Effective volume of crucible(Zinc)	kg	160
Oil consumption of burner	kg/h	1.5~6.0
Volume of oil tank	L	320
Machine weight	kg	3500
Overall dimensions (L x W x H)	mm	3500x1450x2100